Removing the Covers (Rear and Bottom) - TM-m30II-NT - EPSON

Top > Basic Operations > Removing the Covers (Rear and Bottom)

Removing the Covers (Rear and Bottom)

For the top eject position

Follow the steps below to remove the covers.

Use your finger to remove the rear cover as shown in the illustration.

Use your finger to remove the bottom cover as shown in the illustration.

For the front eject position

Follow the steps below to remove the covers.

Use your finger to remove the rear cover as shown in the illustration.

Use your finger to remove the bottom cover as shown in the illustration.

Troubleshooting

Before Using the Printer

Product Models and Supported Interfaces

Part Names

Setup

Basic Operations

Cleaning

Troubleshooting

Appendix

Top > Basic Operations > Removing the Covers (Rear and Bottom)

Removing the Covers (Rear and Bottom)

For the top eject position

Follow the steps below to remove the covers.

Use your finger to remove the rear cover as shown in the illustration.

Use your finger to remove the bottom cover as shown in the illustration.

For the front eject position

Follow the steps below to remove the covers.

Use your finger to remove the rear cover as shown in the illustration.

Use your finger to remove the bottom cover as shown in the illustration.