EPSON JavaPOS ADK Version 1.13.17 Release Notes Seiko Epson Corporation Jun. 3, 2014 1. Outline EPSON JavaPOS ADK Version 1.13.17 has been released. Using this release, you can develop applications that are compatible with UnifiedPOS specification Ver 1.13. This release note contains information for multiple packages. - EPSON JavaPOS ADK 1.13.17 Standard install - EPSON JavaPOS ADK 1.13.17 TM-T88V only install - EPSON JavaPOS ADK 1.13.17 TM-T70II only install - EPSON JavaPOS ADK 1.13.17 TM-T20 only install - EPSON JavaPOS ADK 1.13.17 TM-T81 only install - EPSON JavaPOS ADK 1.13.17 TM-T82 only install - EPSON JavaPOS ADK 1.13.17 TM-T81II only install - EPSON JavaPOS ADK 1.13.17 TM-T82II only install - EPSON JavaPOS ADK 1.13.17 TM-L90 only install - EPSON JavaPOS ADK 1.13.17 TM-T20II only install 2. Confirmed operating environment Operation of EPSON JavaPOS ADK has been confirmed in the following environment. (1) OS (Operating system) Windows 2000 Professional SP4 (32bit) Windows XP Professional SP3 (32bit) Windows Vista SP2 (32bit/64bit) Windows Server 2008 SP2 (32bit/64bit) Windows 7 SP1 (32bit/64bit) Windows 8 (32bit/64bit) Windows 8.1 (32bit/64bit) Windows Server 2008 R2(64bit) Windows Server 2012(64bit) Windows Server 2012 R2(64bit) Windows Embedded Standard (32bit) Windows Embedded Standard 7 (32bit/64bit) Red Hat Enterprise Linux 6.1 (32bit/64bit) SuSE Linux Enterprise 11.1 (32bit/64bit) CentOS Linux 6.0 (32bit/64bit) Ubuntu 9.04 (32bit/64bit) (2) Java operating environment Java Standard Edition 6 Update 26 Java Standard Edition 7 Update 21 http://www.oracle.com/technetwork/java/javase/overview/index-jsp-136246.html Note:(Windows only) When Java version are higher than the following versions, The communication test from SetupPOS cannot be done with SetupPOS. - Java Standard Edition 6 Update 45 - Java Standard Edition 7 Update 21 When you use the communication test from SetupPOS, please change the directory name at the installation destination to the place where the blank is not included when you install Java and JavaPOS. (3) Imaging API Java Advanced Imaging 1.1.3 http://www.oracle.com/technetwork/java/current-142188.html (4) libusb (Linux only) libusb-1.0-0_1.0.8-2_i386.deb(Ubuntu 32bit) http://packages.debian.org/squeeze/i386/libusb-1.0-0/download libusb-1.0-0_1.0.8-2_amd64.deb(Ubuntu 64bit) http://packages.debian.org/squeeze/amd64/libusb-1.0-0/download libusb-1_0-0-1.0.8-4.1.i586.rpm(Other 32bit) http://download.opensuse.org/distribution/11.4/repo/oss/suse/i586/ libusb-1_0-0-1.0.8-4.1.x86_64.rpm(Other 64bit) http://download.opensuse.org/distribution/11.4/repo/oss/suse/x86_64/ 3. Installation and uninstallation Follow the procedures in "EPSON JavaPOS ADK Installation Guide" for installation and uninstallation. Note that cancelling or abruptly terminating the installer during file installation could put the system in a state where further installation cannot be completed. In order to install JavaPOS in this situation, use the "Forced Uninstall" option and then run the installer again. If the process is cancelled while the "Forced Uninstall" options is used, it's possible that the system remain in a state where further re-installation cannot be completed. In this case, use the "Forced Uninstall" option again. When running the installer on a system where JavaPOS was previously installed, it is necessary to install to the same location. If JavaPOS is installed to a different location, previous settings may inhibit correct operation. In order to install JavaPOS to a different location in this case, use the "Forced Uninstall" option to clear all previous settings before running the installer. 4. Support devices Please refer to "SupportedDevicesList.txt" for details. 5. Notes of JavaPOS 5.1 Installation and uninstallation 1) When installing the software, create a folder with the name "epson\pos" in the following directory. Windows Windows 2000/XP/Embedded: :\Documents and Settings\All Users Windows Vista or newer: :\ProgramData Linux /var Temporary files and information files required by DeviceService operations are saved in this "epson\pos" directory. Do not delete this directory. 2) If you select "Custom" for the install type and execute installing, do not specify the root directory ("/") for a shortcut folder. The shortcut folder will not be created. (Linux Only) 3) For installation, a restart is required when the "msvcr71.dll" file is copied to or updated in the \WINDOWS\System32\ directory, or if a file to be installed by the installer is in use at install time. 4) For uninstallation, a restart is required when a file to be uninstalled by the uninstaller is in use at uninstall time. 5) Installer and Uninstaller were able to start for the second time. However, this action is not supported.(Linux only) 6) There is a known issue with the uninstaller following an upgrade installation where the uninstaller will be unable to remove all installation directories. For default installation directory locations, the "/opt/EpsonJavaPOS" directory will not be removed by the uninstaller on Linux systems; the "C:\Program Files\Epson\JavaPOS" and "C:\Program Files\Epson" directories will not be removed by the uninstaller on Windows systems. You can manually delete these directories after the uninstaller runs to completion. 7) If you select "Custom" for the install type and change the location where to install the services of JavaPOS, you cannot start up the CheckHealth tool from the shortcut of the CheckHealth tool created by the installer. In that case, follow the instructions below to correct the Shell script (or batch file) that is the basis of the shortcut. 8) After installing on Linux, there may be a "java.lang.NullPointerException" error with the "RPMSpecFile" indicated in the installer log file (Details: "ERROR - There was a problem creating the RPM package. You may not be running as root or may not have installed RPM Builder correctly."). This is an RPM issue and does not affect the operation of the ADK. 9) Classpath setting Jar files in the directory where services of JavaPOS are installed that require setting for Classpath. 10) Please restart your system after upgrade install When installing by silent from the older versions(Ver.1.11.20 - Ver.1.13) 5.2 Interface connection 5.2.1 USB connection 1) multiple models of the same type: If multiple models of the same type are used in USB connections at the same time, settings must be configured manually(See "5.2.1.1 Procedure"). Note that the procedure varies by model. Windows : TM-H5000II/TM-H5200/TM-J2000/TM-J2100/TM-J7000/TM-J7100/ TM-J7500/TM-J7600 5.2.1.1 Procedure 1) Set the USB port setting [Port Name Type] to [Serial Number]. 2) Specify the USB serial number as the port name. The USB serial number is a serial number provided exclusively for USB. The USB serial number can be checked with the following procedure. - Perform a printer self-test print. Generally, if the printer is turned on with the printer cover closed and the FEED switch held down, self-test printing is performed on roll paper. - The serial number can be identified from the print results. When the print results are in format a), the part shown as "ID" is the USB serial number (in the example below YYYYYYYYYYYYYY is the serial number). When the print results are in format b), the USB serial number is the same as the printer serial number. In this case, check the label attached to the printer. a) When the USB serial number is printed ---------- : Firmware Version X.XX ESC/POS Interface UB-UXXXX Ver.X.XX ID :YYYYYYYYYYYYYY : : ---------- b) When the USB serial number is not printed ---------- : Firmware Version X.XX ESC/POS USB Interface or other : : ---------- * "USB Interface or other" shown above may be printed simply as "USB Interface." Note that when setting the device using this method, changing a device with a different USB serial number, requires changing the SetupPOS settings. Note that on Linux When using the Serial Number as the Port Name Type for a USB connection, only the first 17 characters of the Serial Number should be entered in SetupPOS. If the "Found new hardware wizard" is displayed when the printer is turned ON/OFF, cancel the wizard and install the EPSON Advanced Printer Driver (Version 4.50 or newer). (Windows only) 5.2.2 Bluetooth connection 1) After turning off TM printer power, wait at least 20 seconds before turning power back on. The printer will not print if power is turned on before this time has elapsed. 5.3 Devices 5.3.1 POSPrinter 1) Multi-tone printing: There are following two ways for gray scale printing: - PrintBitmap Set to "Multi Tone" from SetupPOS [Device Details]->[Gradation], or, Change the mode by DirectIO method (DI_SET_BITMAP_PRINTING_TYPE) For your information, white line might be seen in the print result when gray scale printing via serial or Ethernet interface. Also, printing speed might be slower. -NVRAM To register images in the NVRAM, it is necessary to register the image by the utility software at first, then print by DerectIO method (DI_PRINT_FLASH_BITMAP2). 2) Data sent from the printer after OPOS is used Device settings are overwritten once OPOS is used. Depending on this action, data could subsequently be sent from the device. If you then directly connect to the device without using OPOS, please disregard the following data. - 3-byte printer status sent when the power is turned ON - 3-byte power ON notification sent when the power is turned ON 3) You may not print when a printing is performed immediately after you open the cover and close the cover quickly twice. 5.3.2 Keylock 1) Restrictions for using Windows2000. The key lock function of the DM-KX060 (which is an optional keyboard for the IR-700) is not available. 2) Although the SetupPOS function was documented in the DM-KX060 manual, this setting is not included to the current SetupPOS. "KeyPosition Compatibility Mode" will be set "UPOS Specification". 5.4 Others 1) Stand by/hibernation mode for the OS Since it is possible that the driver will become unstable if the computer goes into stand by/hibernation mode while the printer is in use, please avoid the use of stand by/hibernation mode. 2) The right of access to data (Linux only) To store the necessary information, JavaPOS creates a directory called "/var/epson_javapos/pos". Set the access rights of the "/var/epson_javapos/pos" directory, all sub directories, and all files so JavaPOS-using users are allowed to write. 3) The Drag & Drop function in SetupPOS requires GTK 2.10.4 or newer. 4) When SetupPOS is launched through a terminal on SLED 11 environment, GTK-warning will be displayed. However the operation of SetupPOS will not be affected. 5) The logo utility (TMFlogo, etc.) The logo utility is not in this package. For uploading logo data to nonvolatile memory, please use SetBitmap method, or please obtain the logo utility. 6) Sample program - When you use the sample program, the Login ID needs to be the Administrator account group. - Register with the logical device name. POSPrinter : POSPrinter LineDisplay : LineDisplay MICR : MICR CheckScanner : CheckScanner CashDrawer : CashDrawer MSR : MSR Keylock : Keylock ElectronicJournal: ElectronicJournal - The sample program shows an example(s) of control methods. Therefore, it does not guarantee the correct operations for all the settings of all the devices. 7) The location to save the log files The default location to save the trace log file and POSPrinter error log files is as follows: Windows Windows 2000/XP/Embedded: :\Documents and Settings\All Users\EPSON\pos\tm\Trace Windows Vista or newer: :\ProgramData\EPSON\pos\tm\Trace Linux /var/epson_javapos/pos/trace 8) The location to install the Library files (Linux only) The default install location for library files has been changed to the location indicated below. EPSON JavaPOS ADK 1.13.10 or older (32bit): "${JAVA_HOME}/lib/i386" EPSON JavaPOS ADK 1.13.10 or older (64bit): "${JAVA_HOME}/lib/amd64" EPSON JavaPOS ADK 1.13.11 or later (32bit/64bit): "/opt/EpsonJavaPOS/bin" The location does not change, however, if the Java folder ("${JAVA_HOME}/lib/ext") was selected in the Set User Classpath setting during installation. 6. Change History of JavaPOS Standard install [Version 1.13.17] (1)POSPrinter - Bluetooth was added to the TM-T20II support interfaces. - Bluetooth was added to the TM-T20II-42C support interfaces. - Bluetooth was added to the TM-T88V support interfaces. - Bluetooth was added to the TM-T70II support interfaces. (2)CashDrawer - Bluetooth was added to the CashDrawer support interfaces. [Version 1.13.16] - Bug fix. [Version 1.13.15] - Added support for Windows 8.1 (32bit), Windows 8.1 (64bit) and Windows Server 2012 R2 (64bit). - Added support for ARP (Automatic Reduction of Paper) function in TM-T82. - Added support for ARP (Automatic Reduction of Paper) function in TM-T82-42C. [Version 1.13.14] - TM-P80 was added as a supported device. - TM-P80-42C was added as a supported device. [Version 1.13.13] - TM-T20II was added as a supported device. - TM-T20II-42C was added as a supported device. [Version 1.13.11] - Added support for Java SE 7. - The library file install location has been changed. (Linux only) - TM-L90 Simplified Chinese(GB18030) model was added as a supported device. - Added support for ARP (Automatic Reduction of Paper) function in TM-L90. - Added support for GS1, Composite, Datamatrix and Micro QR code symbols in TM-L90. [Version 1.13.10] No change. [Version 1.13.9] - TM-T70II was added as a supported device. [Version 1.13.8] - TM-P60IIPEELER was added as a supported device. [Version 1.13.7] - Added support for Windows 8 (32bit), Windows 8 (64bit) and Windows Server 2012 (64bit). - TM-T82II was added as a supported device. - TM-T82II-42C was added as a supported device. [Version 1.13.6] - TM-P60II was added as a supported device. [Version 1.13.3] No change. [Version 1.13.2] (1)POSPrinter - TM-T81II Simplified Chinese model was added as a supported device. [Version 1.13] (1)New function based on the UPOS V1.12, V1.13 listed below POSPrinter: -ESC sequences Asterisk ESC sequences. Strike-though - Define QR and GS1 bar code symbols for PrintBarCode method (2)SetupPOS - Changed USB interface setting method. - The device can be tested by SetupPOS. (3) POSPrinter - Increase variety of ESC/POS command response which can be notified by DirectIOEvent. - Remove restriction on the number of images which can be stored in the nonvolatile memory (NVRAM). See "SetBitmap method" in each printer manual for the detail. Note:The above changes are for the following categories and devices. Category:POSPrinter,MICR,CheckScanner,LineDisplay,CashDrawer Device:TM-H6000II/III/IV,TM-T20,TM-T70,TM-T88III/IV/V,TM-L90 TM-T90,TM-U220 [Version 1.11.20] (1) POSPrinter - Added support for ARP (Automatic Reduction of Paper) function in TM-T88V. [Version 1.11.18] (1) POSPrinter - Ethernet was added to the TM-T20 support interfaces. - Ethernet was added to the TM-T20-42C support interfaces. (2) ElectronicJournal - Ethernet was added to the TM-T20 support interfaces. - Ethernet was added to the TM-T20-42C support interfaces. [Version 1.11.17] (1) POSPrinter EPSON JavaPOS ADK 1.11.17 TM-T82 only install: - Added support for South Asian languages in a multilingual model of the TM-T82. - Added support for South Asian languages in a multilingual model of the TM-T82-42C. - Ethernet was added to the TM-T82 support interfaces. - Ethernet was added to the TM-T82-42C support interfaces. [Version 1.11.16] (1) Common - Added support for Windows 7 SP1 (32bit), Windows 7 SP1 (64bit), Windows Server 2008 R2 SP1 (64bit). (2) POSPrinter - TM-H6000IV Multilingual Character model was added as a supported device. [Version 1.11.15] (1) POSPrinter - TM-T82 model was added as a supported device. - TM-T82-42C model was added as a supported device. [Version 1.11.14] (1) Common - Added support for Red Hat Enterprise Linux 5.3 (64bit), SuSE Linux Enterprise 11 (64bit), Windows Embedded Standard 7 (32bit) and Windows Embedded Standard 7 (64bit). (2) POSPrinter - Added support for the TM-H6000IV - Added support for the TM-H2000 - Added support for the TM-T81 (3) MICR - Added support for the TM-H6000IV - Added support for the TM-H2000 (4) ElectronicJournal - Added support for the TM-H6000IV [Version 1.11.13] (1) Common - Added support for Windows Vista (64bit), Windows 7 (64bit), Windows Server 2008 R2 (64bit), Red Hat Enterprise Linux 5.3 (32bit), SuSE Linux Enterprise 11 (32bit). - Removed support for Red Hat Linux 9 (32bit), Red Hat Enterprise Linux 5 (32bit) and SuSE Linux Enterprise 10 SP1 (32bit). (2) POSPrinter - Added support for the TM-T20 with a serial connection. - Added support for the TM-T20-42C with a serial connection. (3) ElectronicJournal - Added support for the TM-T20 with a serial connection. - Added support for the TM-T20-42C with a serial connection. [Version 1.11.12] (1) POSPrinter - Added support for the TM-T88V(Simplified Chinese(GB18030) model) - Added support for the TM-T88V(Traditional Chinese model) - Added support for the TM-T20 - Added support for the TM-T20-42C - Added the Multi-tone printing feature.(TM-T88V only) - Added the Optional external buzzer.(TM-T88V only) - Added a setting to allow the default character set to be changed. (TM-T20) - Add support the Unicode for the printing of the character string. (TM-T20) (2) ElectronicJournal - Added support for the TM-T20 - Added support for the TM-T20-42C [Version 1.11.11] (1) Common - Added support for the Unit package - Added support for Windows Server 2008 SP2, Windows Embedded Standard, and Windows 7 (2) POSPrinter - Added support for the TM-T88V - Added a setting to allow the default character set to be changed. (TM-T88V only) - Add support the Unicode for the printing of the character string. (TM-T88V only) (3) ElectronicJournal - Added support for the TM-T88V