Release Note
Memory Switch Setting Utility for Windows
for TM Series
Version 2.59.00
Issue Date : July 30, 2019
We have released the Ver.2.59.00 of Memory Switch Setting Utility for Windows (MSWUTL).
1. Modification
The Changed point from the former version is as following.
- Added the new DEF file to support the new model (TM-L90(68x)FirmVer3.00 or later).
- Changed the DEF file TM-L90(6xx)FirmVer3.02 or later.def to TM-L90(6xx)FirmVer3.02.def.
- Changed the DEF file TM-L90(6xx)FirmVer3.02 or later(58mm).def to TM-L90(6xx)FirmVer3.02(58mm).def.
Also this utility has following features.
- Supported BA-T500, BA-T500II, EU-T300, EU-T300C, EU-T400, EU-T500, TM-C100, TM-H5000II, TM-H6000III, TM-J7000, TM-J7100, TM-J7500, TM-J7600, TM-J9000, TM-J9100, TM-L90, TM-L90 Peeler, TM-P60, TM-P60 Peeler, TM-T70, TM-T82, TM-T86FII, TM-T88IV, TM-T88IV Restick, TM-T90, TM-U220, TM-U230, TM-U675, TM-U950
- Can execute communication test.
- Can set memory switches. (Memory Switch / Customize value etc)
- Included License Agreement screen.
2. Contents of this release version
MSWUTL25900E.zip included Setup files.
And included files are below.
- User's Manual
- Definition files (See Section 3)
- Release note (RelNote_MSWUTLVer25900.htm)
- USB Device Driver Ver.7.10a (Zipped file TMUSB710a.zip)
3. Supports
Environment
Operating System
- Windows 2000 Professional SP4 English Edition
- Windows XP Professional SP3 or later English Edition (32bit)
- Windows Vista Business/Ultimate/Home Premium/Home Basic/Enterprise SP1 English Edition (32bit/64bit)
- Windows 7 (32bit/64bit)
- Windows 8 (32bit/64bit)
- Windows 10 (32bit/64bit)
Disk Space
10 MB or more of free space
Communication Ports
- COMx
* Specify Serial I/F when you use Bluetooth I/F. But, If you execute function of Firmware update, Backup and Restore, please specify the most faster baud-rate of the products.- LPT1
* On Windows 2000 or Windows XP, you cannot use LPT Port when other printer driver (Terminal Printer etc.) was mounted on same port. Please release port for this utility when you use this utility.- USB
* Installation of the USB driver is necessary when you use the USB I/F.
* Use USB driver which is included in OPOS ADK or APD. Use the USB driver which is included in this utility only if you don't use OPOS ADK and APD.
* You can use only one USB device at a time.- Ethernet
* Specify the IP Address which is set to the TM Printer.
* Specify Ethernet I/F when you use 802.11b Wireless LAN I/F.
Support Models
Model Name Definition File Name
(Def File Version)Supported USB class For TM Printer class Vender class Setup Web Update
English Japanese USA Europe Asia Japan BA-T500II with M-T500II BA-MT500II.def Yes Yes Inc. - G03 G03 G03 - BA-T500 with M-T510 BA-MT510.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T520 BA-MT520.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T530 BA-MT530.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T540 BA-MT540.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T510 (USB model) BA-uMT51.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T520 (USB model) BA-uMT52.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T530 (USB model) BA-uMT53.def No Yes Inc. - G03 G03 G03 - BA-T500 with M-T540 (USB model) BA-uMT54.def No Yes Inc. - G03 G03 G03 - EU-T312 EU-T312.def No Yes Inc. - G03 G03 G03 - EU-T322 EU-T322.def No Yes Inc. - G03 G03 G03 - EU-T332 EU-T332.def No Yes Inc. - G03 G03 G03 - EU-T342 EU-T342.def No Yes Inc. - G03 G03 G03 - EU-T312 (USB model) EU-T312u.def No Yes Inc. - G03 G03 G03 - EU-T322 (USB model) EU-T322u.def No Yes Inc. - G03 G03 G03 - EU-T332 (USB model) EU-T332u.def No Yes Inc. - G03 G03 G03 - EU-T332 (USB model) (Product's Sub Code: 2xx) EU-T332u_T332Cu_2xx.def Yes Yes Inc. - G03 G03 G03 - EU-T332C (Product's Sub Code: 2xx) EU-T332u_T332Cu_2xx.def Yes Yes Inc. - G03 G03 G03 - EU-T342 (USB model) EU-T342u.def No Yes Inc. - G03 G03 G03 - EU-T342 (USB model) (Product's Sub Code: 2xx) EU-T342u_2xx.def No Yes Inc. - G03 G03 G03 - EU-T412 EU-T412.def No Yes Inc. - G03 G03 G03 - EU-T422 EU-T422.def No Yes Inc. - G03 G03 G03 - EU-T432 EU-T432.def No Yes Inc. - G03 G03 G03 - EU-T442 EU-T442.def No Yes Inc. - G03 G03 G03 - EU-T482 EU-T482_std.def (2.44.04) Yes Yes Inc. - G04 G04 G04 - EU-T482 (USB model) EU-T482u_std.def (2.44.04) Yes Yes Inc. - G04 G04 G04 - EU-T512 EU-T512.def No Yes Inc. - G03 G03 G03 - EU-T522 EU-T522.def No Yes Inc. - G03 G03 G03 - EU-T532 EU-T532.def No Yes Inc. - G03 G03 G03 - EU-T542 EU-T542.def No Yes Inc. - G03 G03 G03 - TM-C100 TM-C100.def (2.10.00) No Yes Inc. - E00 E00 E00 - TM-H5000II *2 TM-H5k2 (FW Ver5.11 or earlier).def(2.56.01)
TM-H5k2 (FW Ver5.30 or later).def(2.56.01)No Yes Inc. Inc. A00 A00 A00 A00 TM-H6000II with Scanner *2 TM-H6k2s.def (2.56.01) No Yes Inc. - B01 B01 B01 - TM-H6000II with Photo ID *2 TM-H6k2c.def (2.56.01) No Yes Inc. - B01 B01 B01 - TM-H6000II Validation *2 TM-H6k2v.def (2.56.01) No Yes Inc. - B01 B01 B01 - TM-H6000III *2 TM-H6k3.def (2.56.01) No Yes Inc. Inc. D102 D102 D102 D102 TM-J7000 TM-J7k.def (2.20.00) No Yes Inc. - C00 C00 C00 - TM-J7100 TM-J7t.def (2.00.00) No Yes Inc. - A00 A00 A00 - TM-J7500 TM-J75.def (2.20.00) No Yes Inc. - C00 C00 C00 - TM-J7600 TM-J76.def (2.00.00) No Yes Inc. - A00 A00 A00 - TM-J9000 TM-J9k.def (2.31.05) No Yes Inc. - D105 D105 D105 - TM-J9100 TM-J9t.def (2.31.05) No Yes Inc. - D105 D105 D105 - TM-L90 (FW Ver1.xx or earlier) TM-L90 (FW Ver1.xx or earlier).def (2.56.01) No Yes Inc. Inc. H00 H00 H00 H00 TM-L90 (FW Ver3.00 or later) TM-L90 (FW Ver3.00 or later).def (2.49.00) No Yes Inc. - H00 H00 H00 - TM-L90 (6xx) FirmVer1.00 or later TM-L90(6xx)FirmVer1.00 or later.def (2.50.00) No Yes Inc. Inc. H03 H03 H03 - TM-L90 (6xx) FirmVer3.00 TM-L90(6xx)FirmVer3.00.def (2.56.02) No Yes Inc. - H03 H03 H03 - TM-L90 (6xx) FirmVer3.01 TM-L90(6xx)FirmVer3.01.def (2.57.00) No Yes Inc. - H03 H03 H03 - TM-L90 (6xx) FirmVer3.02 (80/40mm) TM-L90(6xx)FirmVer3.02.def (2.59.00) No Yes Inc. - H03 H03 H03 - TM-L90 (6xx) FirmVer3.02 (80/58/40mm) TM-L90(6xx)FirmVer3.02(58mm).def (2.59.00) No Yes Inc. - H03 H03 H03 - TM-L90 (68x) FirmVer3.00 TM-L90(68x)FirmVer3.00 or later.def (2.59.00) No Yes Inc. - H03 H03 H03 - TM-L90 (087) TM-L90(087).def (2.44.02) - - Inc. - - - G02 - TM-L90 Peeler (FW Ver1.05 or earlier) Tm-l90p (FW Ver1.05 or earlier).def (2.56.01) No Yes Inc. - C00 C00 C00 - TM-L90 Peeler (FW Ver3.00 or later) Tm-l90p (FW Ver3.00 or later).def (2.56.01) No Yes Inc. - C00 C00 C00 - TM-P60 TM-P60.def (2.10.00) No Yes Inc. Inc. B00 B00 B00 B00 TM-P60 (bluetooth) TM-P60BT.def (2.10.00) No Yes Inc. - B00 - - B00 TM-P60 peeler TM-P60p.def (2.20.00) No Yes Inc. - C00 C00 C00 - TM-P60 peeler (bluetooth) TM-P60pBT.def (2.41.01) No Yes Inc. - E01 E01 E01 - Modified TM-P60 (Product's Sub Code: 911) TM-P60_911.def (2.42.09) No Yes Inc. - F09 F09 F09 - Modified TM-P60 (bluetooth) (Product's Sub Code: 561) TM-P60BT_561.def (2.44.03) No Yes Inc. - G03 G03 G03 - Modified TM-P60 peeler (bluetooth) (Product's Sub Code: 331, 341) TM-P60pBT_331_341.def (2.44.03) No Yes Inc. - G03 G03 G03 - TM-T70 TM-T70.def (2.31.00) No Yes - Inc. - D100 - D100 TM-T81F for Italy TM-T81F_I.def (2.41.01) No Yes - - - E01 - - TM-T81F for Czech TM-T81F_Czech.def (2.41.01) No Yes - - - E01 - - TM-T82 TM-t82_Serial_USB.def (2.42.10)
TM-t82_Ethernet.def (2.42.10)Yes Yes Inc. - - - F10 - TM-T86FII TM-T86FII.def (2.42.10) Yes Yes Inc. - - F10 - - TM-T86L TM-T86L.def (2.20.00) No Yes - - - - C00 - TM-T88IV TM-T884.def (2.56.01) No Yes Inc. - D104 D104 D104 D104 TM-T88IV Restick TM-t884R_58MM.def (2.56.01)
TM-t884R_80MM.def (2.56.01)No Yes Inc. - F07 - - TM-T88IV Restick for Europe TM-t884R_58MM_Eur_End.def (2.56.01)
TM-t884R_80MM_Eur_End.def (2.56.01)No Yes Inc. - - F07 - - TM-T90 TM-T90.def (2.56.01) No Yes Inc. Inc. B01 B01 B01 B01 TM-T90 (TM-T88II Compatible Mode) *1 T90-T88c.def (2.56.01) No Yes Inc. Inc. B01 B01 B01 B01 TM-T260F TM-T260F.def (2.00.00) No Yes - - - A00 - - TM-U220 *2 TM-U220 (FW Ver4.xx or earlier)E.def (2.40.00) No Yes Inc. Inc. G01 G01 G01 - TM-U220 *2 TM-U220 (FW Ver5.00 to 5.0x)E.def(2.50.01)
TM-U220 (FW Ver5.10 or later)E.def(2.50.01)No Yes Inc. Inc. H02 H02 H02 - TM-U675 *2 TM-U675.def (2.00.00) No Yes Inc. Inc. A00 A00 A00 A00
*1 : Use this definition file when MSW8-7(TM-T88II compatible mode) of TM-T90 is ON.
*2 : You have to set the DSW2-8 to ON if you use the UB-U01/02(II).
A**: Def file Ver.2.00.** will be added when webupdate is executed.
A1**: Def file Ver.2.01.** will be added when webupdate is executed.
B**: Def file Ver.2.10.** will be added when webupdate is executed.
C**: Def file Ver.2.20.** will be added when webupdate is executed.
D**: Def file Ver.2.30.** will be added when webupdate is executed.
D1**: Def file Ver.2.31.** will be added when webupdate is executed.
E**: Def file Ver.2.41.** will be added when webupdate is executed.
F**: Def file Ver.2.42.** will be added when webupdate is executed.
G**: Def file Ver.2.44.** will be added when webupdate is executed.
H**: Def file Ver.2.49.** will be added when webupdate is executed.
Support Function (Supt. : Supported / no: Not supported)
|
Function |
Outline of function |
Model | |||||||||||||||||||
| T90 T88c |
T88IV restick | T88IV /T70 |
T82/ T86FII |
T81F Italy/ Brazil/ Czech |
P60 | L90/L90 Peeler | H6k* | J2k | J7* J9* |
C100 | T8*L | H5k2 H52 |
T260F | H6k U675 |
U220 | H3kr | BA | EU | |||
| Communication Test | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | ||
| Printer Status |
Memory Switch *3 | Indicate or change for Memory switch settings | Supt. | Supt. | no | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | no | no | Supt. | no | no | Supt. | Supt. | no | Supt. | Supt. |
| Dip Switch *3 | Indicate for Dip switch settings | Supt. | no | no | Supt. | no | no | Supt. | no | Supt. | Supt. | no | no | no | no | no | no | no | no | no | |
| Communication Condition *3 |
Indicate or change for communication condition of memory switch | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | no | Supt. | Supt. | no | no | no | no | no | Supt. | no | no | no | |
| User NV / User NVG | Indicate capacity for User-NV and for User NVG | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | no | no | no | no | no | no | no | no | no | |
| Customize Value *3 | Indicate or change for customize value | Supt. | Supt. | Supt. | Supt. | no | Supt. | Supt. | Supt. | Supt. | Supt. | no | no | no | Supt. | Supt. | Supt. | no | no | no | |
| Reset able Maintenance Counter *3 | Indicate or reset for reset able maintenance counter | Supt. | Supt. | Supt. | Supt. | no | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | Supt. | no | Supt. | no | Supt. | no | Supt. | |
| Paper Layout settings *3 | Indicate or change paper layout settings | no | no | no | no | no | no | Supt. | no | no | no | no | no | no | no | no | no | no | no | no | |
| Head Nozzle Check | Print pattern for Head nozzle check | no | no | no | no | no | no | no | no | Supt. | no | no | no | no | no | no | no | no | no | no | |
| Paper Layout Setting | Execute when you want to change the paper type | no | no | no | no | no | no | Supt. | no | no | no | no | no | no | no | no | no | no | no | no | |
*3 : Please refer to the specification, for values which it can read or it can set
4. History
| Release Version (Issue Date) | History |
| Ver.2.59.00 (July 30, 2019) |
* Added the new DEF file to support the new model (TM-L90(68x)FirmVer3.00 or later). | Ver.2.57.00 (December 17, 2014) |
* Added the new DEF file to support the new
model (TM-L90(6xx)FirmVer3.02 or later (80/40mm)). |
| Ver.2.56.02 (September 18, 2014) |
* Added the new DEF file to support the new
model (TM-L90(6xx)FirmVer3.01 or later). |
| Ver.2.56.01 (May 28, 2014) |
* Added the new DEF file to support the new
model (TM-L90 with Peeler FirmVer3.00 or later). |
| Ver.2.50.01 (January 23, 2014) |
* Added the below supported model. |
| Ver.2.50.00 (November 11, 2013) |
* Added the Flow Control at Serial I/F. |
| Ver.2.49.00 (May 23, 2013) |
* Added the below supported model. |
| Ver.2.44.04 (November 8, 2012) | * Added
the below supported model. EU-T482 For that, added below DEF files in the utility's setup package. EU-T482_std.def, EU-T482u_std.def |
| Ver.2.44.03 (August 2, 2012) | *
Added below DEF files in the utility's setup package. BA-MT500II.def, BA-MT510.def, BA-MT520.def, BA-MT530.def, BA-MT540.def, BA-uMT51.def, BA-uMT52.def, BA-uMT53.def, BA-uMT54.def, EU-T312.def, EU-T322.def, EU-T332.def, EU-T342.def, EU-T312u.def, EU-T322u.def, EU-T332u.def, EU-T332u_T332Cu_2xx.def, EU-T342u.def, EU-T342u_2xx.def, EU-T412.def, EU-T422.def, EU-T432.def, EU-T442.def, EU-T512.def, EU-T522.def, EU-T532.def, EU-T542.def, * Modified the bug of the below DEF files. TM-P60BT_561.def, TM-P60pBT_331_341.def |
|
Ver.2.44.02 (Mar 21, 2012) |
*
Added below DEF file of new model (TM-L90 Taiwan
convenience ticket printer (087)) in the utility's
setup package. TM-L90(087).def |
|
Ver.2.44.01 (Dec 16, 2011) |
*
Added below DEF files in the utility's setup package. TM-U220 (FW Ver5.00 or later)E.def TM-U220 (FW Ver4.xx or earlier)E.def * Deleted below DEF file from the utility's setup package. TM-U220.def |
|
Ver.2.44.00 (Oct 26, 2011) |
*
Added the below supported model. TM-L90 (6xx). 6xx means the product's sub-type code. * Modified the bug that a page number in the setting screen of printer status of TM-L90 is not displayed correctly. |
|
Ver.2.42.10 (Jun 17, 2011) |
*
Added the below supported model. TM-T82, TM-T86FII |
|
Ver.2.42.09 (Nov 26, 2010) |
* The modified TM-P60 (Product's Sub Code: 331, 341, 561,911) is supported. |
| Ver.2.42.08 (September 17, 2010) | * Newly supported the TM-U220B BM (Taiwan model) by WebUpdating. |
| Ver.2.42.07 (July 3, 2009) | * Newly supported the
TM-T88IV Restick for Europe. * Eliminated the bug for the setting of TM-T88IV ReStick (utility's version: 2.42.04) had been released only for USA. |
| Ver.2.42.04 (Apr 20, 2009) | * Newly supported the TM-T88IV Restick. |
| Ver.2.42.01 (May 28, 2008) | * Modified the TMUSB.zip including in the install package. |
| Ver.2.42.00 (March 31, 2008) | * Newly supported Windows VISTA SP1. |
| Ver.2.41.01 (March 28, 2007) | * Newly supported the
TM-T81F for Czech. * Modified to support the communication condition for TM-T81F: Supported the switching with UIB mode. |
| Ver.2.40.00 (October 13, 2006) | * We supported the COM5 or later. |
| Ver.2.31.05 (April 26, 2006) | * Updated the TM-T9000.def / TM-T9100.def. (The setting of Pwib as a head rank is added.) |
| Ver.2.31.04 (March 28, 2006) |
* Updated the TM-T88IV.def. |
| Ver.2.31.03 (February 22, 2006) |
* Newly supported the TM-H6000III with Scanner / Photo ID / Validation. |
| Ver.2.31.02 (February 22, 2006) |
* Updated the TM-H6000III. |
| Ver.2.31.00 (January 27, 2006) |
* Fixed the problem that the communication
condition of printer status can not be got. |
|
Ver.2.30.00 (December. 21, 2005) |
* Newly supported the TM-T88IV. |
|
Ver.2.20.00 (August. 31, 2005) |
* TM-U120: Newly supported. |
|
Ver.2.10.02 (August. 31, 2005) |
* Supported the TM-P60 with Peeler. |
|
Ver.2.10.01 (June. 30, 2005) |
* Supported the TM-H6000III. |
|
Ver.2.10 (Mar. 18, 2005) |
* Fixed the problem of the Printer Status
function. |
|
Ver.2.01 (Nov. 5, 2004) |
* Supported the TM-L90 Peeler. |
| Ver.2.00 (Sep 10, 2004) | * Changed the user interface. * Supported the Ethernet I/F. * Supported the Web Update function. * Supported the TM-J9000, J9100. * Supported the TM-C100. |
| Ver.1.37 (Mar 24, 2004) | * Supported the TM-P60. * Modified the DEF file for TM-T90. (Added the MSW8-3 function) |
| Ver.1.36 (Oct 1, 2003) | * Supported the TM-H6000II with
Image Scanner (Photo ID) Model and TM-H6000II Validation Model. * Modified the DEF file for TM-L90. (Added the MSW8-3 function) |
| Ver.1.35 (May 14, 2003) | *Supported the TM-U220. *Modified the DEF file for TM-T90. (Added the MSW8-3 function) |
| Ver.1.34 (February 26 2003) | Add Support Model (TM-J7500,
TM-J7600) Def file version is 1.32. |
| Ver.1.32 (July 10 2002) | Add Support Model (TM-J7000,
TM-J7100, TM-H3000R) Supported USB I/F. Def file version is 1.32. |
| Ver.1.22 (December 26 2001) | New Release Def file version is 1.22. |
5. Open Source Software License
About the Info-Zip License
This utility incorporates compression code from the Info-ZIP group.
This is version 2009-Jan-02 of the Info-ZIP license. The definitive version of this document should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely and a copy at http://www.info-zip.org/pub/infozip/license.html. Copyright (c) 1990-2009 Info-ZIP. All rights reserved.
For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals:
Mark Adler, John Bush, Karl Davis, Harald Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath, Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda, Christian Spieler, Cosmin Truta, Antoine Verheijen, Paul von Behren, Rich Wales, Mike White.This software is provided "as is," without warranty of any kind, express or implied. In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of the use of or inability to use this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the above disclaimer and the following restrictions:
- Redistributions of source code (in whole or in part) must retain the above copyright notice, definition, disclaimer, and this list of conditions.
- Redistributions in binary form (compiled executables and libraries) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or other materials provided with the distribution. Additional documentation is not needed for executables where a command line license option provides these and a note regarding this option is in the executable's startup banner. The sole exception to this condition is redistribution of a standard UnZipSFX binary (including SFXWiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been removed from the binary or disabled.
- Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, versions with modified or added functionality, and dynamic, shared, or static library versions not from Info-ZIP--must be plainly marked as such and must not be misrepresented as being the original source or, if binaries, compiled from the original source. Such altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail addresses or the Info-ZIP URL(s), such as to imply Info-ZIP will provide support for the altered versions.
- Info-ZIP retains the right to use the names "Info-ZIP," "Zip," "UnZip," "UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.